Structural Drying for Des Moines Homes After Water
Short answer
Structural drying removes moisture from framing, subfloors, walls and concrete after water is out. We get an independent, certified local crew moving, and they set up and monitor the equipment until readings are back to normal.
Water or fire damage right now?
Call any time of day. If you would rather not talk yet, send a few photos and tell us what happened.
Fire, gas smell, or a risk of electric shock: leave the building and call 911 first.
What structural drying is
After the standing water is out, the building is still wet. Water soaks into subfloors, wall bottoms, insulation, framing and concrete. Structural drying is the process of pulling that moisture out with equipment so the building returns to its normal moisture level.
It is not the same as running a box fan. Done well, it is measured. The crew takes readings before they start, sets up equipment, checks again each day and keeps going until the readings match dry reference points in the same house.
What to do while you wait for a crew
- Keep out of wet rooms if there is any chance electricity is involved. Call if water is near outlets or the panel.
- Do not use a household vacuum on water.
- Lift small items off wet floors if you can do it safely. Place foil or plastic under furniture legs.
- Take photos of the damage before anything is moved. Send photos and get help now.
- Call. We get an available independent, certified local crew moving as fast as we can. Call any time.
The equipment
- Air movers push air across wet surfaces to help water evaporate.
- Dehumidifiers pull that moisture out of the air so it does not just settle somewhere else. Both low-grain refrigerant types and desiccant types are used.
- Moisture meters read how wet wood, drywall and concrete are.
- Thermal cameras show cool, wet areas behind walls.
- Wall and floor drying systems push air into cavities through small openings, or draw moisture from under hard floors with mats.
Why Des Moines conditions matter
Drying works by moving moisture from wet materials into the air and then removing it from the air. The air in Des Moines is not always cooperative.
In summer, the city has hot and humid weather, with highs often in the 90s. Outdoor air carries a lot of moisture, so opening windows can slow drying. The crew will usually keep the building closed up and run dehumidifiers. After the August 10, 2020 derecho, wind-driven rain came into damaged roofs and windows across the metro, and drying interior walls was complicated by humid air and, for many people, no power to run equipment. A crew will talk to you about power needs, because drying equipment uses a lot of electricity.
In winter, the problem flips. Cold air holds little moisture, and heated indoor air is dry, which helps. But the cold slows evaporation from cold surfaces, such as basement walls and slabs. Winter lows often fall below zero, and keeping the heat on is part of drying. Tell the crew if the furnace is out.
Which materials dry and which do not
- Framing and subfloor. Wood can usually be dried in place if it has not been wet too long.
- Concrete. Slabs and basement walls hold moisture for a long time and dry slowly. This is why basements take longer, especially after events like the June 30 to July 1, 2018 flash flood, when 5 to 10 inches of rain fell over parts of Polk County.
- Drywall and insulation. Clean-water wetting may dry in place. Contaminated water, or long-term wetting, usually means removal.
- Carpet and pad. Pad is often discarded. Carpet may be saved if the water was clean and the work starts quickly.
- Hardwood and engineered floors. Can cup and buckle. Specialized drying sometimes saves them. Not always.
When something must come out, the crew will tell you. A separate contractor handles rebuilding afterwards. Please do not remove materials yourself first.
How the crew knows it is dry
The crew sets a dry standard by measuring unaffected materials in the same house. Then they check the wet areas on each visit, usually daily, and move or remove equipment as areas reach the target. They should show you the readings. Ask to see them. Drying is finished when the numbers say so, not when the surface feels dry.
Why drying cannot wait
Wet materials can start to break down, swell or smell within days. Hidden dampness behind walls and under floors can allow mold to grow. Mold work is outside what we offer, but we do point out that quick, complete drying is the main way to avoid it.
Hidden moisture
Water travels. A leak in one room often shows up several feet away. This is why the crew checks beyond what you can see. In older homes with plaster walls, balloon framing or multiple layers of flooring, water can hide in places that take extra effort to reach, so ask the crew how they check.
Insurance and cost
Insurers often want drying records, including readings and equipment logs. Ask the crew for them. See water damage cleanup cost for broad published ranges, and filing a water damage claim for claim steps.
How we help
A certified technician answers your call, and we get an independent, certified local crew out to your home. Calling and sending photos cost nothing, and you agree on the work and price with the crew before they start. See about. Related: emergency water removal, flooded basement cleanup. Areas: Des Moines, West Des Moines, Ankeny, Urbandale.
Questions to ask the crew
Ask how many pieces of equipment they plan to use and where. Ask how often they will come back to check readings. Ask what the dry target is for each material. Ask what happens if a wall or floor is not drying as expected. A crew that welcomes these questions is doing the job in the open. You should also ask how much the equipment will add to your electric bill, since fans and dehumidifiers run around the clock.
Questions
How long does drying take?
It depends on what got wet, how much and for how long. Many jobs run for several days, and concrete basements can take longer. The crew will tell you based on their readings.
Why are the machines so loud?
Air movers and dehumidifiers run all day to pull moisture out of materials. The crew should explain when they will check and remove them.
Can I just open the windows?
Not in a Des Moines summer. Humid outdoor air can add moisture, and in winter cold air can slow drying and risk frozen pipes. Let the crew decide.
Does drying prevent mold?
Fast, complete drying lowers the chance of mold growth. Mold work is outside what we offer.
Last updated 2026-11-16.